RetroPie allows you to turn your Raspberry Pi into a retro-gaming machine. It builds upon Raspbian, EmulationStation, RetroArch and many other projects to enable you to play your favorite Arcade, home-console, and classic PC games with the minimum set up.
To set it up you need the following:
- Raspberry PI 3
- MicroSD card
- HDMI cable
- Powerbank or 5V 2.5A micro USB power supply
- Ethernet cable for initial setup
Installing RetroPie is very smooth and easy.
You should start by downloading the SD image for your version of Raspberry Pi from https://retropie.org.uk/download/ and then extract the downloaded
.gz file, which file will be a
In order to install it on your SD card you need a program called Win32DiskImager, if you are on Windows.
Your SD card might appear to have less capacity than the usual one. Mine is 32GB but, as you can see, it appears to be of 60MB. This is because I already used it for other Raspberry-related installations and because EXT4 file system is not visible on Windows systems. Click on Write and in about a minute the process will have been finished.
For more info, or in case you are using Mac or Linux, you can read this guide.
Afterwards, remove the SD card from your machine, plug it in your Raspberry PI and power it on.
On the first boot, the filesystem will be expanded automatically and then you will be welcomed with a screen to configure your controllers.
To configure your Retropie system you can connect to it remotely through SSH.
Find the IP in your network and then SSH using defaults:
- username: pi
- password: raspberry
For all the available options you can run the following script:
where you get a GUI with all the available options:
Xbox One Controllers
Although many controllers are supported out of the box, mine, an Xbox One controller, appears to not be working properly. After some time, I realized that the problem lies with a specific model, the 1697, so here is a workaround to fix it.
While still on SSH, run the following commands:
# Get rpi-source headers from here
sudo wget https://raw.githubusercontent.com/notro/rpi-source/master/rpi-source -O /usr/bin/rpi-source && sudo chmod +x /usr/bin/rpi-source && /usr/bin/rpi-source -q --tag-update
# Install BC the GNU arbitrary precision calculator language
sudo apt-get install bc
# Run it
# Fetch and install the latest version of xpad.
sudo git clone https://github.com/paroj/xpad.git /usr/src/xpad-0.4
sudo apt-get install dkms
sudo dkms install -m xpad -v 0.4
After rebooting, hold any button on your Xbox one controller and the controller name will appear at the bottom. Then the configuration menu will appear:
Follow the onscreen instructions to configure the controller and if you want to skip a button, just press and hold this button for a few seconds.
Due to the nature/complexity of copyright/Intellectual Property Rights Law, which differs significantly from Country to Country, ROMs cannot be provided with RetroPie and must be provided by the user. You should only have ROMs of games that you own.
For example if you own a ROM of Super Mario Bros 3 you put it in